Share link via
Or copy link
One Ø2-inch round-post platform, engineered once and offered in eight interchangeable glass and metal infills — change the look floor to floor without changing the system, the hardware, or the spec.
—
Change the infill, not the system. CIRCA carries one refined aesthetic across glass, wire mesh, perforated metal, laser-cut panels, cable, picket, multiline and CableNet.
At the core of every CIRCA guard is the same engineered platform: Ø2-inch round tubular stainless-steel posts and a consistent fixed-point, framed-panel detail. That shared platform lets a project change infill floor to floor — or building to building — while the posts, hardware, finish and top rail stay identical. Posts space up to 5'-0" on center for glass and 4'-0" for cable and multiline, all engineered to the commercial 42-inch guard height at 200 lbf concentrated and 50 lbf/ft uniform loads.
Every CIRCA configuration is built for real projects: laminated glass from 1/2" to 1" with PVB or SGP interlayers, Ø3/16" Type-316 stainless cable, architectural stainless mesh, and perforated or laser-cut panels — all beneath a stainless-tube, U-cap or wood (maple, cherry or oak) top rail. Integrated iRAIL™ LED lighting, standard #6 satin and #8 mirror stainless finishes, architectural powder-coat colors, and PVDF are available across the family.
Because CIRCA is one system, its CAD details, Revit/BIM families and 3-part CSI specification (Section 05 73 00) are shared across every infill — and mounting adapts to concrete, steel and pour-stop substrates in top-of-slab, fascia and core-drilled conditions. The platform is third-party validated under ICC-ES ESR-4405 and tested to ASTM C1172 and C1048, with ETL-certified illuminated options.
CIRCA is VIVA Railings' post-supported guard and handrail system, built on Ø2-inch round tubular stainless-steel posts with fixed-point, framed infill panels. One engineered platform is offered in eight interchangeable infills — glass, wire mesh, perforated metal, laser-cut panels, cable, picket, multiline and CableNet — so the look can change while the system, hardware, finish and spec stay the same.
Eight: laminated glass, architectural wire mesh, perforated metal, 1/4-inch laser-cut aluminum panels with 60-plus patterns, Ø3/16-inch stainless cable, Ø1/2-inch stainless picket, horizontal multiline, and flexible stainless CableNet mesh. Every infill shares the same posts, hardware, finishes and top-rail options.
Yes. CIRCA is engineered to the commercial 42-inch guard height with 200 lbf concentrated and 50 lbf/ft uniform loads, meets the 4-inch sphere opening rule, and is third-party validated under ICC-ES ESR-4405 and tested to ASTM C1172 and C1048. Every project ships with Professional-Engineer-stamped shop drawings and calculations sealed in the project state, and illuminated options are ETL-certified.
Yes. The Revit/BIM family (.rfa), CAD details (.dwg), 3-part CSI specification (Section 05 73 00) and product-data PDF are available directly from this page with no login required, and the downloadable set reflects your selected infill and pattern.
Configure the exact CIRCA assembly, pull the Revit, CAD and 3-part CSI spec, or start with a Design Assist call. One system, one spec, one accountable partner.21
