PanelScapes

⚡ PanelScapes

Panel Scapes
Modular Wall Panels

Name: VIVA Railings
Price range: $

A Quick Ship, supply-only system of standardized metal panels drawn from a curated subset of our pattern library. Designed for fast specification and efficient installation, PanelScapes delivers clean aesthetics, consistent quality, and competitive value for interior and exterior applications — without the lead time of fully custom systems.

Start Your Design ↗ View Product Data (Flat) View Product Data (Formed) Request a Quote

Quick Ship

Delivery Model

30+

PATTERNS

Al, SS, S

MATERIALS

05 7000

CSI DIVISION

Select your panel type to begin

Flat Panel

Single-plane, exposed fasteners · Interior applications · 5 standard sizes

QUICK SHIP

Formed Panel

Dimensional profile, hidden channel · Int + Ext (<30 PSI) · 4 standard sizes

QUICK SHIP

CSI Specs

Download specification documents for both panel types

PDF ↓

STEP 1 — CHOOSE YOUR PANEL TYPE

Flat or Formed — Which is Right For Your Project?

Both ship in ~6 weeks, supply-only. The choice comes down to profile depth, installation method, and whether you need exterior capability.

PANELSCAPES

FLAT Panel

✓
Simplest install — exposed fastener system
✓
Channel system — End Panel (A), Middle Channel (B), Outer Corner (C), Inner Corner (D)
✓
Thin, minimal aesthetic profile
✓
Interior use · Sq. Drive #10×1 fastener
✓
Corner and end panels available: 1.5" and 8"

ApplicationInterior only

FastenersExposed

Standard sizes (W×H)36×48, 36×60, 36×96, 36×120, 48×96"

Panel modulesA · B · C · D · E

Typical offset2 ¾ " TYP

Best For

Lobbies, Elevator surrounds, corridors, Interior Spaces Management, Privacy Barriers

View Flat Specs Build Flat Panel

PANELSCAPES

FORMED Panel

✓
Hidden channel system — tool-free rearrangement
✓
Greater dimensional depth (2¾" TYP offset)
✓
Interior AND exterior low wind loads (<30 PSI)
✓
Fasteners on end trims only — clean face
✓
Corner and end panels available: 1.5" and 9"

ApplicationInterior + Exterior (<30 PSI)

FastenersHidden (end trims only)

Standard sizes (W×H)44×44, 44×55, 44×88, 44×110"

Panel modulesF · G · H · I

Typical offset2¾" TYP

Best For

Exterior accent facades, balcony dividers, feature walls where profile depth adds visual impact. Low wind load exterior environments.

View Formed Specs Build Formed Panel

STEP 2 — REVIEW SPECIFICATIONS

Material & Weight Data

Same materials available across both Flat and Formed panels. Weight data applies to 30% open laser-cut patterns as well as solid panels.

PANEL WEIGHT · LB/FT²PANEL WEIGHT · LB/FT²

MATERIAL	SOLID	30% OPEN
Aluminum1/8" · 3.2mm	1.76	1.23
Aluminum3/16" · 4.8mm	2.63	1.84
Aluminum3/16" · 4.8mm	3.51	2.45

SURFACE FINISHESBy Material

MATERIAL	FINISH OPTIONS
Aluminum	Powder Coat AAMA 2604
Stainless Steel	Brushed Satin · Glass Bead Satin · Cross Hatch · Swirl
Stainless Steel	Zinc Rich Primer + Powder Coat · Mill Finish

💡 All panels available as solid or laser-cut perforated. Custom patterns available on request

STANDARD PANEL SIZES — FLATW × H inches

36 × 48"36 × 60"36 × 96"36 × 120"

↓ Flat Panel Matrix (PDF) ↓ Formed Panel Matrix (PDF)

STEP 3 — CHOOSE YOUR PATTERN

Pattern Collections

30+ curated patterns across three categories — Primary, Geometric, and Organic. Filter by design intent, or specify a custom pattern. All available as solid or laser-cut.

PP-01

PALLADIAN

PP-03

SCHOTTISCHE

PG-05

PG-06

GEOMETRIC

PO-11

FYLLO

PO 12

VERGANO

🎨

Showing 16 of 30+ available patterns. The full pattern library — including Primary, Geometric, and Organic categories — is accessible in the Panel Builder tool. Custom patterns and solid panels are available on request. Visit vivarailings.com/laser-cut-metal-patterns to browse the complete WallScapes library.

Browse All Patterns in Panel Builder ↗

ENGINEERING RESOURCES

Downloads & Documentation

Everything your team needs to specify, detail, and install PanelScapes — from CSI specs to installation guides.

Product Matrix

Flat Panel — Product Matrix

Standard sizes, weights, and configurations for Flat Panel system

Product Matrix

Formed Panel — Product Matrix

Standard sizes, weights, and configurations for Formed Panel system

STEP 4 — UNDERSTAND INSTALLATION

Mounting Systems

Installation is by your contractor of choice — compatible with any framing, glazing, interior, façade, or millwork contractor. Two primary methods, each with four corner/end conditions

Method 1 · FLATChannel Wall Attachment

Panels offset from wall via a proprietary channel — creates depth and a dimensional look. Channel fastens to structure; panels clip in. Typical offset: 1⅝". Interior fastener: Sq. Drive #10×1. Exterior: Drill-Flex ¼×1⅝" with washer.

A · End PanelB · Middle ChannelC · Outer CornerD · Inner Corner

Method 2 · FLATDirect Wall Attachment

Thin, minimalistic look. Panels attach directly to the wall substrate. Anchors supplied by others. No channel offset — flush to wall surface. Clean, tight appearance preferred for interiors where minimal depth is key.

A · End PanelB · Middle ConnectionC · Outer CornerD · Inner Corner

WHERE PANELSCAPES WORKS

Applications

PanelScapes covers a broad range of architectural and commercial applications. Both Flat and Formed panels work across these use cases — Formed adds exterior capability.

INTERIOR

Lobbies, Corridors & Elevator Surrounds

Both Flat and Formed panels create striking interior feature walls. Pattern choice drives the mood — geometric for corporate, organic for hospitality.